Huma FX Impact MKII Tuning Regulator Gen 3 XHP

Huma FX Impact MKII Tuning Regulator Gen 3 XHP

This will also work for the Maverick and DRS

Unfortunately the fixed limited space in the FX Impact MKII action was not sufficient for our standard Huma-Air Regulator design, so we had to comply our design to the ratio's used by FX.
Never the less we have accomplished to make a great replacement regulator what will solve the know issues of the factory regulator.



So what can you expect of the Huma-Air FX Impact, FX Crown or Maverick Tuning Regulator:

The output performance of the Huma-Air Impact MKII regulator won't be very different compared to a good functioning FX factory regulator, but we have some other benefits available
Three special pressure ranges are available so you can tune the rifle exactly according to your own wishes
This Huma-Air FX impact  regulator can be adjusted higher in pressure from the outside while the rifle is under pressure.
By using another type of material for the valve and piston, there is no way you can damage the piston because of faulty pressure adjustments.
We also supply some extra valves, so in case you adjust the pressure to the wrong side, and you damage the valve, it can be replaced without any extra costs.
 

Pressure settings

The design of the regulator makes it posible for setting it exactly to your wishes while placed in you FX impact MKII by watching the output pressure gauge on you rifle.

Adjustment range of 100-200Bar

We have currently three pressure ranges for the FX Impact or FX Crown Gen3 regulator available:

- The Extra High Pressure range, 100-200 Bar for more extreme purposes and very good for the slugs and heavy pellets

.
Please note: you need to do the stacking of the belleville springs on the piston yourself according to the manual, because we do not want to risk them to fall off the piston during shipping.

When you order your FX Impact  MKII regulator you will receive:

• Your regulator with the belleville springs, matching the pressure range you choose.
• A set of spare valve disks
• We will also include a “Huma-Air regulated” breech sticker
• Fitting instruction as pdf download

Huma-Air Quality Control

Huma-Air regulator's are CNC produced out of high grade aircraft Aluminum and bronze.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. 
We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy.