UTG PRO® 30mm/2PCs Medium Profile P.O.I® Picatinny Rings

SKU:
RWU013015
$54.99
(No reviews yet) Write a Review
Width:
1.00 (in)
Height:
1.00 (in)
Depth:
1.00 (in)
Current Stock:

Out of stock

Out of Stock
DETAIL INFORMATION • Proudly Designed and Made in USA• Medium Profile P.O.I® (Precision Optics Interface) Rings Have a 30mm Center Height to Fit Optics with a 30mm Tube and up to a 59mm Outer Objective• The Innovative P.O.I® (Precision Optics Interface) Addresses 3 of the Most Critical Areas in Scope Rings - a) Progressively Machined for a Precise Inner Ring Surface to Achieve a Seamless Ring-to-Scope Interaction b) Low Profile and Flush-fitting Locking Side Plate Controlled by Dual Spring Loaded Guide Rods Interfacing with the Rail with Torx Screw Locking to Ensure Secure and Repeatable Zero Hold c) Square-shaped Integral Recoil Stop Interfacing with a Picatinny Slot via Complete Surface Contact to Eliminate the Possibility of Forward and Aft Movement from Recoil Vibrations• 2 Piece Ring Set, Each Equipped with 4 Top Torx Screws and Designed with a 22mm Ring Width• Designed to Fit on Mil-spec 1913 Picatinny Rail Platforms• Machined from 6061-T6 Aluminum Alloy and 4605 Steel with Matte Black Hard Coat Anodize• UTG PRO® Original Snag-free Contoured Profile with Reduced Weight and Size
NOTE: We recommend to tighten the ring top screws with a torque value of about 25 inch-lb and the side plate screw with torque value of about 45 inch-lb.